The front cover access panel needs to be removed to replace the front turn
indicator lights / lenses. There are four screws attaching the access panel to
the Sparrow frame:
left/right side of windshield
left/right side of headlight
Step 1
Remove each of the screws with a 5/32" allen wrench. Set the panel aside.
Step 2
There are two brackets that attach the turn indicator to the Sparrow
frame. Using a 7/16" socket or wrench, loosen the bolt on the bottom
bracket.
Step 3
Support the turn indicator while completely removing the bottom bracket by hand.
Step 4
Turn the indicator over, grasp the connector near the light fixture and
carefully remove the 3-prong connector from the indicator.
Reverse the steps in this procedure to install a new turn
indicator