The front cover access panel needs to be removed to replace the front turn indicator lights / lenses. There are four screws attaching the access panel to the Sparrow frame:

• left/right side of windshield
• left/right side of headlight

Step 1

Remove each of the screws with a 5/32" allen wrench. Set the panel aside.

Step 2

There are two brackets that attach the turn indicator to the Sparrow frame. Using a 7/16" socket or wrench, loosen the bolt on the bottom bracket.

Step 3

Support the turn indicator while completely removing the bottom bracket by hand.

Step 4

Turn the indicator over, grasp the connector near the light fixture and carefully remove the 3-prong connector from the indicator.

Reverse the steps in this procedure to install a new turn indicator