Alert Use ONLY DOT 4 Synthetic Brake Fluid! Do not mix with
other types of brake fluid.
Step 1 - Brake Fluid
To fill the master cylinder, you must first open the hood. The hood
release handle is located under the right side of the dashboard near the radio.
Pull out on the handle to open the hood.
Step 2 - Brake Fluid
In the photo to the left, the master cylinder is the clear plastic
container located in the foreground.
Step 3 - Brake Fluid
CAUTION: Do not allow dirt, grease, etc. to fall into the master cylinder
reservoir.
Spin the black cap off the container and fill the master cylinder with DOT 4 Synthetic
Brake Fluid to the MAX. indicator.
Printer-Friendly Version
Alert
