Step 1

When you get into your Sparrow, fasten your safety belt.

Step 2

If necessary, adjust the two rearview mirrors.

Step 3

Check the forward/reverse switch, ensuring it is straight up in the neutral position.

Step 4

Put your foot on the brake pedal.

Step 5

Release the parking/emergency brake at your left.

Step 6

Turn the ignition key all the way to the right (to "start"). When you hear a loud click in the controller compartment, the green enable light on the dashboard will illuminate and a buzzer will sound.

Your Sparrow is now powered up.

Step 7

Check the digital display on the E-meter on the dashboard for battery pack voltage.

Step 8

Turn the forward/reverse switch to the right to go forward, and to the left to back up.

Step 9

Accelerate slowly to prevent drawing excessive amps.