Corbin Sparrow
:
Maintenance
:
Rear Turn Indicators
Back to OneCARE
Rear Turn Indicators
Back to Normal Version
Page 62
Step 1
To gain access to the rear turn indicator light sockets, open the rear hatch by depressing the black hatch button.
Step 2
Under the hatch, you will see the rear turn indicator sockets. Each turn indicator has a socket with a flexible clip (black arrow).
Step 3
Grasp the socket and push in on the flexible clip with your thumb. Continue to depress the flexible clip while rotating the socket counterclockwise.
Step 4
Pull the socket away from the hatch.
Step 5
Push in on the bulb and twist counterclockwise to remove the bulb from the socket. Reverse the steps in this procedure to replace the bulb.
Step 6
Check for proper operation:
left indicator
right indicator
brakes and hazards
Check for newer version of this manual