Dome Light Replacement
Printer-Friendly VersionPrinter-Friendly Version 
 
Preceding Page In Manual:

"Belt Inspection"Page 55Next Page In Manual:

"Emergency Brake "

Step 1
Click for larger imageClick for larger image
To replace the dome light, carefully insert a straight slot screwdriver into near the edge of the dome light casing. Pry the casing away from the Sparrow's ceiling.
Step 2
Click for larger imageClick for larger image
With your fingers, reach into the casing and pull the bulb out. Replace the bulb and reinstall.

Check for newer version of this manual