OneCARE SMARTManuals



		The back-up light bulb / lens is easily replaced.
Step 1
		Look underneath the rear of the Sparrow frame and locate the back-up light socket. NOTE:If you need to replace the lens, remove the two philips head screws on either side of the socket, push the lens out and replace with a new lens.
Step 2
		Grab the tabs on the socket and turn counterclockwise. Pull the socket out of the frame.
Step 3
		With a flat head screwdriver, pop the retaining clip (black arrow) off the socket and remove the bulb. Reverse the steps in this procedure to reinstall the bulb / socket assembly.
Step 4
		Check the light for proper operation.