The inertia switch is a safety device that, when activated, cuts off all power to your Sparrow from the battery pack. It is located under the hood, near the back firewall. The inertia switch will activate when unusual physical forces, such as those experienced during an accident or rollover, are detected.

To reset the inertia switch, simply depress the center of the red rubber cover protecting the switch.

SMARTManual Extra! - ZoomPix

Use the toolbar at the bottom of the image manipulate the photo.

• plus sign - zoom in or click and drag over a specific area
• minus sign - zoom out
• hand - move the image
• square - resets the image to its original size
• red circle/square - disabled